Simpson Strong-Tie MBHU3.56/9.25KT Masonry Beam Hanger They may be installed either

They may be installed either flush or raised off the mudsill without a reduction in load value

The Simpson Strong-Tie HU216-2 is a double 2 x 16 hanger made with 14 gauge galvanized steel

the THAR/L422 has a standard skew of 45°

one-piece connector

Simpson Strong-Tie MBHU3.56/9.25KT Masonry Beam Hanger They may be installed eitherThe MBHU beam hanger provides a face mounted solution for connecting beams to masonry or concrete walls. A non welded, one piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD screw anchor and Strong Drive SDS screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier