Teac A-5300 tension arm Cap The gear cogs slips or

The gear cogs slips or breaks its a very very common problem mainly caused by using old sticky tape or using studio thicker tape the R8 was designed to use the thinner tape for home use

these are not New old stock NOS they are 100% brand new motors from the factory in Japan itself

Used on the model 80 machine this sits under thr roller and is screwed to the frame it is not the one for the sensor as has no hole for wiring

Lovely clean reel table clamp from a 34 but i think these are common in the later 1/4 inch machines

Teac A-5300 tension arm Cap The gear cogs slips orNice clean cap from a A 5300 it may well be same on the A 5500 Needs a buff at the edges but sound, rare part now