X-Plus/X-Max all-metal Hotend Fiber Reinforced 10 % Heat Deflection Temperature

10 % Heat Deflection Temperature 102 °C Melting Temperature 250 °C Melt Index 4 g/10 min

It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PAHT-CF vacuum foil bag for printing

With a wide recommended printing speed range of 20-250 mm/s and support for extreme speeds of up to 500 mm/s

the safer printing Odorless-ABS

X-Plus/X-Max all-metal Hotend Fiber Reinforced 10 % Heat Deflection TemperatureSuitable for X Plus X max high temperature extruder. New all metal hot end is compatible with new carriage, if your hot end is not shown as pic, please Check if the carriage is same as below with fan duct: If carriage is not same as pic, please purchase the carriage with hot end, replace both parts.