raise3d interchangeable hot end assembly with 0 4mm v3h nozzle pro3 Creality 3D - CR-5060 - Reservedele Spænding: 24V

Spænding: 24V

The filament has excellent mechanical properties and superior printing characteristics

This thermistor is without a connector and must be soldered or you can use solder sleeves that you can find here

Simplify3D är en elektronisk programvarunedladdning

raise3d interchangeable hot end assembly with 0 4mm v3h nozzle pro3 Creality 3D - CR-5060 - Reservedele Spænding: 24VRAISE3D Interchangeable Hot end Assembly with V3H Nozzle for the Pro3 series The coated V3H nozzle improves filament feeding capabilities and provides greater wear resistance than the standard brass Hotend. It can be used for left and right extruders. If you use different nozzle bores, you will need to adjust the nozzle parameters and extension width in the slicer. The nozzle diameter must also be adjusted in the hardware settings on the device.