nke 40 250 260 aa2f2aesbaqejwa 99098351 Motor type is IPM with

Motor type is IPM with embedded magnets in the metal cladded rotor – needs frequency drive to start and speed regulate

1 kW MS402 motor with sand shield

The chamber stack is turned upside-down to ensure that the shaft seal is not affected by the high pump discharge pressure

De constructie maakt de terugtrekking van de injectie-eenheid uit de proceslijn en het schoonmaken ervan

nke 40 250 260 aa2f2aesbaqejwa 99098351 Motor type is IPM withNon self priming, single stage, centrifugal pump designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092 2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber